What it's for
A digital EDM mix stays unglued. Transients fight.
On drums, a group, or the 2-bus the kick stays a separate click, the hats hiss apart from the pad, and the vocal never settles into the bus. A cassette runs several linked nonlinearities in one DSP path.
Signal path
One pass. Oversampling. No lookahead.
The whole wet path runs at a raised sample rate, then downsampling. PLAY is dry/wet smoothed over ~10 ms: off means dry signal, VU needles fall left and stay on the scale.
Tape formula
NORM · CrO2 · METAL — different EQ before and after saturation
Each formula puts a low-shelf before the clip and a high-shelf after. TYPE sets what hits the nonlinearity. The switch is smoothed over ~70 ms, so the bus stays click-free.
| TYPE | Pre-shelf | Post-shelf | Character | Where it goes |
|---|---|---|---|---|
| NORM | +3.0 dB @ 90 Hz | −2.2 dB @ 5.2 kHz | Warm low end, dark 80s cassette | Drum bus, 808, warm 2-bus |
| CrO2 | +1.8 dB @ 380 Hz | +1.8 dB @ 7.5 kHz | Mids forward, chrome | Synths, vocal, toms |
| +3.2 dB @ 130 Hz | +2.6 dB @ 10.5 kHz | Punch plus air, the loudest of the three | Lead, FX, a hard drop |
What's inside
Saturation, glue, modulation — three separate laws
softTape
Asymmetry x + 0.14·asym·x², then tanh(1.45x) and a cubic tail. Drive = 1.15 + LEVEL·2.2. Peaks round off. RMS comes up.
Density glue
>Detector after a 110 Hz HP. Attack 2.8 ms, release 200 ms, threshold 0.18. GR = 1 / (1 + density·4.5·over). Makeup is tiny, so SPEED leaves the level alone. The kick keeps its hit. The body of the bus sits down.
Wow / flutter
>Cubic Hermite delay. Wow 0.42–1.27 Hz (two phases), flutter 6.5–15.5 Hz. Depth grows with SPEED. L/R are slightly detuned (0.96), which opens the width.
DOLBY + LF mono
>HF shelf −6 dB @ 6.2 kHz, plus a soft-clip on the top only. Lows go partly mono (0.2…0.75 with density), so the 808 and kick stay centered on a club PA.
Starting points
Don't turn everything to 10. Here are the working windows.
| Job | TYPE | LEVEL | SPEED | AGE | DOLBY |
|---|---|---|---|---|---|
| Drum bus, glue with the vintage kept light | NORM | 2.5–4 | 2–3.5 | 0–1 | off |
| Synth / pad — chrome | CrO2 | 3–5 | 3–5 | 1–3 | on |
| Lead / FX in the drop | METAL | 4–7 | 2–4 | 0–2 | off |
| Vocal bus, sitting in the mix | CrO2 | 2–3.5 | 1.5–3 | 0.5–2 | on |
| 2-bus, a light print | NORM | 1.5–3 | 1–2.5 | 0–0.8 | off |
| Lo-fi / tape-stop feel | NORM | 5–8 | 6–9 | 5–8 | on |
PLAY switches the processing off (bypass). VU needles drop left and stay visible, the way they do on a real machine.
One path
Saturation, glue, and motion in one path
| A usual chain | TAPE 1989 | |
|---|---|---|
| CPU / latency | 3–4 inserts, different OS, different lookahead | One OS path. Latency is the oversampler. |
| How the knobs connect | Drive leaves wow alone. Glue ignores TYPE. | LEVEL feeds sat, glue, and trim. SPEED feeds glue and the modulation. |
| Low end | 808 width often spreads after sat | LF mono rises with density. The club center holds. |
| Highs | A separate de-esser / shelf | DOLBY sits the top. The body stays. |
| Bypass | A/B across three plugins | One PLAY button |
Specs
Short version for manual readers
- Format Mac Audio Unit · Standalone
- DSP Stereo, oversampled sat + IIR shelves + envelope glue
- Modulation Dual wow + flutter, Hermite interpolation
- TYPE NORM / CrO2 / METAL — separate pre/post shelves
- DOLBY HF shelf 6.2 kHz, −6 dB + soft HF
- AGE 1-pole darken; past 5 — mid scrape / tremble, no hiss
- PLAY Host bypass / dry-wet, VU needles stay
- Default Light NORM — you hear the glue, the effect stays quiet
Put it on the drum bus. Leave AGE alone. Listen for 20 seconds.
The bus locks into one sound. That's TAPE 1989.