VU + LUFS, PRE/POST, TRIM. The meter stays on.
RACK 6 in 1 MIXING STEPS
Mix by stages — one plugin per track
SENSE → TONE → DENSITY → GLUE → PLACE → SPACE. A mix algorithm in a narrow 200 px rack.
What it is
A simple pass on every channel: 1 plugin, 6 moves, and the track is ready for the mix.
MIXING STEPS is a channel strip numbered 1–6. One instance on the track, top to bottom: hear it, clean it, thicken it, glue it with tape, place it, then add air where the track needs it.
Inside is the STM chain: meter + trim, EQ, CLIP, TAPE 1989, WIDTH / Pusher, a light SPACE. Defaults are safe. Drop it in and the track barely moves until you turn a knob.
CLEAN → EQ: LF / L-MID / H-MID / HF + HP. IN starts ON, bands at zero.
BODY → CLIP: body and ceiling, SOFT/HARD. IN ON, BODY 0 leaves the clip idle.
TAPE: LEVEL / SPEED / AGE, NORM·CrO2·METAL. IN starts off. You turn the tape on.
WIDTH → PUSHER. Full left is mono, full right is 100% stereo. PUSH = 0, band B.
SIZE / MIX / DUCK. IN starts off, MIX 0. No reverb printed across the session.
$54 · €50
Demo
Hear the plugin at work
До
До обработки
Файлы будут загружены позже
После
После плагина
Файлы будут загружены позже
DSP
Signal chain order
METER → CLEAN/EQ → BODY/CLIP → TAPE → WIDTH/PUSHER → SPACE. CLIP sits before TAPE on purpose: density first, then tape.
| Floor | IN default | Transparent start |
|---|---|---|
| 1 SENSE | — | TRIM 0, PRE |
| 2 TONE | ON | EQ 0, HP off |
| 3 DENSITY | ON | BODY 0, CEIL open, SOFT |
| 4 GLUE | OFF | CrO2 selected, AGE 0 |
| 5 PLACE | ON | WIDTH 100%, PUSH 0 |
| 6 SPACE | OFF | MIX 0 |
Next
AU · Standalone · manual
Plugin: MIXING STEPS.component. The UI above is the same one as in the studio.